Why Circular Vibrating Screen can not Start up and Amplitude is Small ?

Days ago,my Russian friend asked me why circular vibrating screen could not start up,however,the amplitude was quite small even if it start up,and the screening efficiency is quite bad,here I summarize the reasons as follows:
1.The circular vibrating screen motor breaks down,please replace the motor;
2.The electrical equipment control circuit fails,please maintain and replace the electrical equipment;
3.The voltage is low,you can alter the power supply;
4.There are many accumulation materials on the surface,please clean up the material;
5.The screen itself has fault,please check and maintain the vibrating screen;
6.The lubricating oil is over thick or caking,please clean the screen and add new lubricating oil;
7.You can also add balance weight to increase the amplitude.
Besides,please also note that the adjustment of vibration source on vibrating screen(exciter or vibrating motor) must be same,or it will cause equipment damage.

Reasons lead to circular vibrating screen mesh plug

When circular vibrating screen works, the material properties are very different, as well as its shape. Due to different shape of material ,it can produce a various forms of mesh plug.After the analysis of PK machinery engineers, the cause of mesh plug mainly shown as follows:
1.Contains a lot of close to the separation point particles
2. The material moisture content is higher
3. The spherical particles or material has multi-contact points property to mesh 
4. Static electricity occurs
5. Material is a fibrous material
6. Flake shape material proportion is more
7. Woven mesh wire diameter is too thick
8.Thick Sieve mesh, unreasonable hole shape design, which will lead particles get stuck.

What is the required data for tripper conveyor model selection?

Tripper conveyor can be designed to achieve discharging bulk material along the belt conveyor. It is applied to large area store material in warehouse etc. very well.The tripper conveyor is a kind discharge device, which can achieve multiple point discharging along the belt conveyor system, also can achieve both side discharging or single side discharging.

The rail for tripper conveyor is welded on the top of the conveyor intermediate frame, the rail length is designed according to the customer’s required discharging length.

In order to send you a better project solution, please supply the following technical requirements: 
1. The required discharge length for tripper conveyor ____m;
2. Do you have any installation space limit;
3. The required capacity ____t/h;
4. The length for belt conveyor system ____m;
5. Transported material name _____;
6. Material particle size distribution_____mm;
7. Material temperature ____℃;
8. Material density ____ t/m3;
9. If you have the required belt width, please kindly list ____mm. Or we will help you design it according the the above information.

What is the selection notice of rotary vibrating screen?

1.Size of working area: rotary vibrating screen is circular, sieve surface area will effect of screening yield, so screening efficiency and yield can be improved by increasing the screening area. So the size of the field is one of the keys to the vibration screening.
2.Material characteristics: material properties,flowability and size.
3.Construction material : because of the different sieving materials, the construction material is also different, for example: food, salt, sugar and other related food industries, the whole machine material is SUS304. One reason is that hardness,thickness and wear resistance of 304 material are better, besides, polished stainless steel is bright like a mirror, the surface is clean and health, maintenance is very convenient which do not affect the material quality after screening. If the material is chemical, metallurgical and other raw materials, you can choose Q235 material, which not only save cost but also not affect the use.
4.Screen mesh can be divided into two kinds: stainless steel and carbon steel.
The shape and size of rotary vibrating screen are different generally based on the actual application and the on-site condition, and can be designed according to the requirements of clients to meet special circumstances. Common types of rotary vibrating screen: XZS-800mm, XZS-1000mm, XZS-1200mm, XZS-1500mm, XZS-1800mm, etc. 

What is the Helpful installation tips of vibrating feeders?

Vibrating feeder is generally used for evenly, regularly feeding, distributing bulk material in different production lines to guarantee the steady connecting between the upper and bottom equipment. When feeder model is small with little capacity, the drive device can be 2 sets vibrating moor; while the feeder model is large with heavy capacity, the driven device can be 2 sets motor and vibrating exciter. It will be selected according to the actual technical requirements. 
In addition, vibrating feeder can be designed to be seated type or hanging type according to the on-site working condition and installation space. 
When vibrating feeder is installed under the hopper or silo outlet, and there is no enough or suitable installation foundation for vibrating feeder, it can be hanged with hanging devices to save the installation space,which makes the equipment connecting more easier. 
If the customers require seated type,vibrating feeder should be installed on embedded foundation.
If the material size is very small,similar like powder, dust etc. The vibrating feeder can be enclosed with dust hole and connect the dust collector in system to protect the environment. 
If any special requirements, vibrating feeder can be customized to meet the special technical requirements. 

What should We do to Use #Vibrating #Feeder Safely?

Are you obtaining the correct methods to operate the vibrating feeder safely? Following mentioned points are the matters users should notice during operation,we are sure you will benefit a lot!   Firstly, lubrication
Regular maintenance and overhaul are important means of extending the service life of the machine and ensuring the normal work, users should attach importance to it. For lubrication, users should pay attention to the following two points:
1.The machine adopts thin oil splash lubrication, the lubricant should be determined according to the use place, temperature conditions. General used oil is gear oil;
2.Make sure that the exciter in the thin oil is higher than the standard height (filling by joint bend), oil must be replaced every three to six months, when we change the oil, please use clean gasoline or kerosene to clean the oil tank, bearing raceway and gear surface. Secondly, we need to be aware of safety technology of the following points during use:
1. The machine operators should subject to security technology education;
2. Reinforce all the bolts to prevent the looseness in the operation process;
3. Often view the amplitude of the vibration motor, if it is unusual, immediately stop and repair.
4. When the vibrating feeder is running, it is forbidden to stand beside the machine, touch, adjust, clean or inspect the machine and so on;
5. Equipment should be grounded, wire should be reliably insulated, and packed in a snakeskin tube, we should often check whether the motor wiring wears and leaks of electricity.